ELECTRIC ROUND THE POLE
The pole can be built of ball bearings, a piece of
wood, double sided circuitboard and some other things, mostly found in peoples
hideouts. The ball bearings can be from old gearboxes, but new ones are not so
expensive, inner diameter around 30 mm. Before use wash out the bearings because
oil are a insulator. The pole are to be placed on a heavy piece of wood 60 * 60
cm.
The voltage to the model comes from a
powersupply, that should be capable of giving from 20 to 40 volt ( there are a
great loss in the flying wires ) my monster supply can give 55 volt at 15 Amp,
neat little supply weighing 20 kg's. Electronic regulators can be used, but
there are a heat problem cause of the great loss of voltage when regulating.
Drawing of a easy to build model ( ideal
for combat flying, full contact ) 50 cm of wing span
Drawing of a RTP model, used in the youth school.
Do you have a question , you can E-mail me. Opdateret d. 16-12-01